Tuesday 3 July 2012

Final Engine Testing

Here's a vid of the engine back in after painting the engine bay and fitting a straight through exhaust. The noise was immense, the muffler will have to go back on I think haha. The jet unit was connected up at this point to check the whole drivetrain. A splitter from the hose is sending coolant to the engine and also to the impellers to help the impellers bed into the ABS wear rings in the jet unit.


9 comments:

  1. I had a mate back in the 70's who had one of these in blue. Nice wee boat

    ReplyDelete
  2. Thanks. Not many left now. Hope to get a video of it on the water this year. Just needs a new windscreen and coat of polyurethane paint now and it will be like new.

    ReplyDelete
  3. Hi, im wondering if you get in touch to help me to try and obtain a Rotax 637 engine. Any information or contacts would be helpful. We have a totally original Meteor and looking for an original engine. Hoping you can help, my email is eamonnl2004@hotmail.co.uk

    ReplyDelete
  4. Very nice and interesting blog on the Meteor, I am awaiting with interest your piece on the timing and Carb settings for the Bing and the Rotax. By the way I have 2 Meteors.

    ReplyDelete
  5. Hi Liam,
    I am currently running 18 degrees max advance on the ignition (stock setting). I will increase this to 20 on the next outing, then carefully increase timing from there in combination with the carb settings. I will not exceed 25 degrees though. I will also be fitting a rev counter so i can see what the maximum revs are up to, and then re-pitch the prop for some extra speed. I think 40 mph is possible with the stock motor and impeller with all the settings right. Once i've got it running its best i'll post up the settings.
    Dom

    ReplyDelete
  6. Dom
    Thanks for that, I will await to see how you get on before I start tinkering with my timing.

    By the way does anyone know how many Meteor Jet Boats are still in existence.

    Liam

    ReplyDelete
  7. I reckon there's no more than 5 in the UK in working condition. Probably up to 50 rotting away in backyards.
    They were very expensive when new so not many sold. Most people went for the cheaper outboard. Would be interesting to know how many were made.

    ReplyDelete
  8. Dom
    Would you have the serial number of the Bing carbs. Looking on ebay and there are numerous Bing 54's for sale.

    ReplyDelete
  9. Hi ME,
    Could you ping me an email to dom100@hotmail.com and i'll dig out the info.
    Cheers
    Dom

    ReplyDelete